Main Content

Voltage Measurement

Measure voltage in circuit

expand all in page
  • 库:

  • Simscape / Electrical / Specialized Power Systems / Sensors and Measurements

  • Voltage Measurement block

Description

TheVoltage Measurementblock measures the instantaneous voltage between two electric nodes. The output provides a Simulink®signal that can be used by other Simulink blocks.

Ports

Output

expand all

输出瞬时voltage measured between the + and - conserving ports, specified as a scalar.

Conserving

expand all

Specialized electrical conserving port associated with the positive terminal of theVoltage Measurementblock.

Specialized electrical conserving port associated with the negative terminal of theVoltage Measurementblock.

Parameters

expand all

Specifies the format of the output signal when the block is used in a phasor simulation.

Set toComplexto output the measured current as a complex value. The output is a complex signal.

Set toReal-Imagto output the real and imaginary parts of the measured current. The output is a vector of two elements.

Set toMagnitude-Angleto output the magnitude and angle of the measured current. The output is a vector of two elements.

Set toMagnitudeto output the magnitude of the measured current. The output is a scalar value.

Dependencies

To enable this parameter, set theSimulation typeparameter of thepowerguiblock toPhasororDiscrete phasor.

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

版本历史

Introduced before R2006a

See Also

||