Verification with FPGA Hardware
These features provide connections between your FPGA board and your simulations in Simulink or MATLAB.
FPGA-in-the-loop (FIL) enables you to run a Simulink or MATLAB simulation that is synchronized with an HDL design running on an Intel®, Microsemi®, or Xilinx®FPGA board.
FPGA data capture is a way to observe signals from your design while the design is running on the FPGA. It captures a window of signal data from the FPGA, based on your configuration and trigger settings, and returns the data to MATLAB or Simulink.
MATLAB AXI master provides access to live on-board memory locations from MATLAB. You must include the MATLAB AXI master IP in your FPGA design.
To use these features, you must download a hardware support package for your FPGA board. SeeDownload FPGA Board Support Package.
- FPGA-in-the-Loop
Test designs in real hardware - FPGA Data Capture
Capture signal data from live FPGA - MATLAB AXI Master
Access AXI slave memory on FPGA board from MATLAB - Custom FPGA Board Definition
Create board definition files for FPGA verification projects